Monday, April 8, 2024

110% Anderson Pylon

 I also got the sides joined on the Andersen Pylon today..

Had to work fast with making first both sides and then before the longerons which had soaked in Windex for two days due to their high density and then the sides were joined together

With no strain and will hold that form as they dry.

Notice that the rear part of the longerons are also 3/8” sq Spruce and that the highly curved front 1/3 is very hard balsa.

Also put large gussets holding the front pieces where the landing gear and motor will be mounted.


Jay Burkart

No comments: