Tuesday, February 28, 2012

Lost Hills, CA

IMG_8226


Hi all,
Here are 14 pages of photos taken of the Issaccson contest, PanAm contest and MaxMen contest Feb 10 through Feb 19 at Lost Hills, CA by Malcolm Campbell of Australia. There were 100 foreigners and 80 flyers from USA in FAI alone plus a substantial number of SAM and AMA entries. I'm in pictures 7839, 8058, 8188, 8222, 8226.

IMG_7839

Monday, February 27, 2012

Sunday, February 26, 2012

Thursday, February 23, 2012

Vladimir Sychov's Folder

Tom,

I just got back from a Fabulous February at Lost Hills, CA. I saw Vladimir Sychov make over a dozen flights with his folder. Pretty impressive, I must say. Only bad thing was that it was a 50-50 chance it would fall on its back and do a half loop after the engine quit. The alternate chance was it would flop bottom down and wings deploy for a perfect transition to glide. See attachments.

Gil









He has changed from the dual counter rotating props, gear driven arrangement seen on Volar Libremente, to a single direct drive prop and engine. Still goes straight up with a twist.

OT Model Exposition in Belgium

Tom,

Yves Bourgeois of Belgium sent me this. I'm not sure what it says but imagine it is about a model display.

Gil

Quelques Photos de notre première organisation SAM "Exposition de Wavre"

Yves

Le message est prêt à être envoyé avec le fichier suivant ou les liens


Remarque : pour se protéger de virus informatiques, il se peut que les
programmes de messagerie électronique évitent d'envoyer ou de recevoir
certains types de pièces jointes. Vérifiez les paramètres de sécurité de
votre messagerie électronique pour déterminer de quelle manière les
pièces jointes sont gérées.



Wednesday, February 15, 2012

1/2A Texaco Foote Westerner

Hi Guys
The 1/2 A Texeco C Westerner ready to cover . Been flying the Funtana
the past year what a blast , I manage to ge it up and down with no damage to the model or my pride.














The landing gear is removable ; the upper portion of the gear is sandwiched with 1/16 plywood sewed to the gear then 1/64 ply on either side, a box built into the fuselage retains the gear . (press fit)

Bob Bienenstein

Tuesday, February 14, 2012

Dave Platt Half Tone 3


I just finished this Half Tone. I've been working full time for the past 3 months, which put a crimp in my building. I modified my Spektrum DX5e so that I plug in a cable
where the 5th channel was and use a push button. The escapement works perfectly and I'm sure it will bring back fond memories when in the air.
Dave Acton