Showing posts with label popsie. Show all posts
Showing posts with label popsie. Show all posts
Saturday, March 27, 2010
Monday, March 8, 2010
Vic Smeed Popsie part 6

Hi Tom,
Little Fat Sucker with a Fat J-3 Cub Stripe. No matter how nicely I build this model or decorate it, people are going to laugh!
The model is ready for flight. The Tee connector has not arrived, but I can plug the battery to the ESC. I checked the controls this morning and ran the motor a little.
Let me know when you are coming to pick up the model. I will charge the battery so we can make the initial flight at the college.
~Bucky Walter
Saturday, March 6, 2010
Vic Smeed Popsie part 5
The Coverite lite weight material that looks like transparent tissue is a bear to work with on sheet wood and on compound curves.
I installed screen door mesh on the last bottom open area to exit the heat from the battery and the ESC and keep out small critters.
This model is so fat it is hard to get a good photograph.
Labels:
coverite,
light weight,
popsie,
replikit,
vic smeed,
vintage r/c
Saturday, February 27, 2010
Vic Smeed Popsie part 4

More construction photos of The Little Fat Sucker.
I install a piece of 3/32 plywood at the CG location on the wing center panel. Then you can screw an eye screw into the plywood at the CG point. As you can see from the photos you simple hang the model from the eye screw and check the CG fore and aft and side to side.
The wing mount was changed from using rubber bands to a bolt on wing mo
unt. The installation of triangular gussets in the top corners of the fuselage for the bolt on installation increased the strength of the cabin area. The plans called for no gussets and using flimsy plastic for side windows and the windshields.
I used Scotch Packaging tape to mount Velcro on. No need to dope or varnish the balsa surface. You put a piece of tape on the balsa wood. Then remove it to pickup balsa dust and loose slivers of balsa wood. Then put on a fresh piece of tape to mount the Velcro. This works fine for light weight articles such as the Spectrum receiver and the ESC unit.
The battery is mounted on plywood and the Scotch Packing tape is used to remove wood dust and plywood slivers. The Velcro is applied and CA around the edges. The battery is a heavy item (about 5 to 6 ounces). In a crash or rough landing you do not want that weight breaking loose and causing more damage then is necessary.
To be on the safe side, hooks were added to restrain the battery with rubber bands. The hooks are made with Stem Wire 20 Ga. It is soft iron wire and bends easily. Stem wire can be obtained at florist shops.
Remember - There are two types of airplanes - Those that have crashed and those that are going to crash!
Bucky
Monday, February 22, 2010
Vic Smeed Popsie part 3
Scaled up to double size, gives some perspectiveas to how portly this model is:






Hi Guys,
Just had to take photo of This Fat Little Sucker!
The Kit manufacturer can call it The Aesop.
Tom Ryan and Gene Wallock can call it The Popsie.
Bucky Walter calls it
The Fat Little Sucker
The kit did not contain the necessary 3/16 square to complete the construction.
Also the trailing edge piece was a wee bit too short for the wing & the spar material for the wing and stab was a wee bit too short also.
The tail wheel supplied was larger than shown on the plans. The wheels are a lighter substitute from E-Flite.
I was able to correct all the shortages of wood in the kit. Rest of the kit is excellent but these crazy English like to assemble then cover a model!
Wednesday, February 17, 2010
Vic Smeed Popsie part 2




Hi Guys,
Some photos of the Aesop or Popsie.
Stopped working on the fuselage. Waiting for servos which
are on order.
I will have plenty of room for the servos and any other thing I want to install in that huge fuselage.
Tom Ryan sent me the wheels which are light weight wheels for electric models.
I just had to send a few photos of the fuselage on my work bench.
Will start to work on the flying surfaces soon.
Bucky
Tuesday, February 2, 2010
Vic Smeed Popsie Part 1

Hi Guys,
Tom Ryan's late Xmas gift for Ole Bucky came from England. It arrived on Ground Hog Day! The box had a long crush mark on the cover, but everything was A-OK inside the box. Great packing job with corrugated paper.
As you can see from the photos all the parts are laser cut and a complete set of hardware is included. Tom told me he removed the clunky wheels. He did not like them and he is going to send me a set of wheels he likes. The kit includes three sets of CAD plans with complete instructions.
Also, Tom told me the kit has been renamed the Aesop but is in fact a re-engineered Vic Smeed Popsie.
It will be my next project.
Bucky
Labels:
aesop,
Bucky Walter,
popsie,
replikit,
vic smeed,
vintage r/c
Subscribe to:
Posts (Atom)